Cross-connection surveys are a comprehensive inspection of a facility (new or existing) to determine whether connections exist between potable water outlets and a source of contamination or pollution. If any such connection exists, then a backflow prevention device will need to be installed. In order to provide this type of service, regulation states that the work should only be performed by personnel knowledgeable about commercial and industrial potential cross-connections, as well as general industrial uses for both potable and process water. American Backflow Solutions, LLC, meets these requirements. We can identify and install the correct type of backflow device for each connection point based on your industry and application. Additionally, we can also determine the size and location of the device while ensuring all compliance requirements are followed.
No job is too small or too large. With our team of highly experienced and qualified backflow professionals, we are well-positioned to validate the effectiveness of backflow prevention and cross-connection control programs across a broad spectrum of industries. We can test, repair, and install all sizes and types of devices. In fact, with our several years of experience, we have the demonstrated competency and capability of managing the most mundane to extremely complex backflow prevention and cross-connection control programs. Additionally, we hold special certification to perform comprehensive inspections of new and existing facilities to determine whether backflow prevention is needed.
For any of the work that you request to have completed, we will provide an estimate of the cost and time involved for the service required. Upon your approval, we will schedule an appointment time to perform and complete the work.